Products
FERROUS SULPHATE (Dried)
........................................................................................................................................................................................................................................

Ferrous sulphate (Dried)

Synonyms : Dried Ferrous Sulfate

CAS No

13463-43-9

Molecular Formula

FeSO4. xH2O

Molecular Weight

151.91

Description

Grayish White Powder

Grade

Technical*

SPECIFICATION

Assay (On Dry Basis)

86% MIN

*Also available Pure, Pharma passing, LR, AR and ACS Grade

Login
Get a Bulk Quote Request !

                               

Material Safety Data Sheet

Ferrous Sulfate (Dried)

 

Section 1: Chemical Product and Company Identification

 

Chemical Name: Ferrous Sulfate (Dried)

 

CAS#: 7720-78-7

RTECS: Not available.

TSCA: TSCA 8(b) inventory: No products were found.

CI#: Not available.

Synonym: Ferrous Sulfate Hydrate; Ferrous Sulfate Dried

Powder

Chemical Formula: FeSO4.xH2O

 

Contact Information:

 

Vishnupriya Chemicals Pvt. Ltd.

 

Office No. 7, Meridian apartments

Lake Hills Road, New MLA Quarters

Basheerbagh, Hyderabad 63,  A.P

Tel :  040 - 23225550

Fax : 040 23223177

Email : info@vishnupriya.in

Website : www.vishnupriya.in

 

Section 2: Composition and Information on Ingredients

 

Composition:

 

Name

CAS #

% by Weight

Ferrous Sulfate (Dried)

7720-78-7

90 ~ 100

 

Toxicological Data on Ingredients: Not applicable.

 

Section 3: Hazards Identification

 

Potential Health Effects:

 

Eye Contact: Causes irritation, redness, and pain.

 

Skin Contact: Causes irritation to skin. Symptoms include redness, itching, and pain.

 

Ingestion: Low toxicity in small quantities but larger dosages may cause nausea, vomiting, diarrhea, and black stool. Pink urine discoloration is a strong indicator of iron poisoning. Liver damage, coma, and death from iron poisoning has been recorded. Smaller doses are much more toxic to children.

 

Inhalation: Causes irritation to the respiratory tract. Symptoms may include coughing, shortness of breath.

 

Chronic Exposure: Severe or chronic ferrous sulfate poisonings may damage blood vessels. Large chronic doses cause rickets in infants. Chronic exposure may cause liver effects. Prolonged exposure of the eyes may cause discoloration.

 

Section 4: First Aid Measures

 

Eye: Immediately flush eyes with plenty of water for at least 15 minutes, lifting lower and upper eyelids occasionally. Get medical attention immediately.

 

Skin: Immediately flush skin with plenty of soap and water for at least 15 minutes. Remove contaminated clothing and shoes. Get medical attention. Wash clothing before reuse. Thoroughly clean shoes before reuse.

 

Ingestion: Induce vomiting immediately as directed by medical personnel. Never give anything by mouth to an unconscious person. Get medical attention.

 

Inhalation: Remove to fresh air. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Get medical attention.

 

Section 5: Fire and Explosion Data

 

General Information:

As in any fire, wear a self-contained breathing apparatus in pressure-demand, and full protective gear. During a fire, irritating and highly toxic gases may be generated by thermal decomposition or combustion. Substance is noncombustible. This material in sufficient quantity and reduced particle size is capable of creating a dust explosion.

 

Extinguishing Media:

Use protective clothing and breathing equipment appropriate for the surrounding fire. Use any means suitable for extinguishing surrounding fire.

 

Autoignition Temperature: Not applicable.

 

Flash Point: Not applicable.

 

Explosion Limits, lower: Not available.

 

Explosion Limits, upper: Not available.

 

Section 6: Accidental Release Measures

 

General Information: Use proper personal protective equipment as indicated in Section 8.

 

Spills/Leaks: Vacuum or sweep up material and place into a suitable disposal container. Clean up spills immediately, observing precautions in the Protective Equipment section. Avoid generating dusty conditions. Provide ventilation. Place under an inert atmosphere.

 

Section 7: Handling and Storage

 

Handling: Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Use only in a well-ventilated area.

Minimize dust generation and accumulation. Avoid contact with eyes, skin, and clothing. Keep container tightly closed. Avoid ingestion

and inhalation. Do not ingest or inhale. Handle under an inert atmosphere. Store protected from air.

 

Storage: Store in a tightly closed container. Store in a cool, dry, well-ventilated area. Do not use this product if coated with

brownish-yellow basic ferric sulfate. Isolate from incompatible substances.

 

Section 8: Exposure Controls/Personal Protection

 

Engineering Controls: Facilities storing or utilizing this material should be equipped with an eyewash facility and a safety shower. Use adequate ventilation to keep airborne concentrations low.

 

Exposure Limits: 1 mg/m3 (TWA) soluble iron salt as Fe

 

Personal Protective Equipment

 

Eye: Use chemical safety goggles and/or full face shield where dusting or splashing of solutions is possible. Maintain eye wash fountain and quick-drench facilities in work area.

 

Skin: Wear appropriate protective gloves to prevent skin exposure.

 

Clothing: Wear appropriate protective clothing to prevent skin exposure.

 

Respirators:A respiratory protection program that meets OSHA's 29 CFR :1910.134 and ANSI Z88.2 requirements or European Standard EN 149 must be followed whenever workplace conditions warrant a respirator's use.

 

Section 9: Physical and Chemical Properties

 

Appearance: Slight grey to off-white powder or granular

 

Odor: Odorless.

 

Solubility: 48.6 g/100 g water @ 50C (122F)

 

Density: 1.90

 

pH: 3.0 5.0

 

Boiling Point: > 300C (> 572F) Decomposes.

 

Melting Point: 57C (135F) Loses water

 

Section 10: Stability and Reactivity Data

 

 

Chemical Stability: Stable under ordinary conditions of use and storage. Looses water in dry air and oxidizes upon exposure to moisture, forming a brown coating of extremely corrosive basic ferric sulfate.

 

Conditions to Avoid: Moisture.

 

Incompatibilities with Other Materials: Alkalis, soluble carbonates, and oxidizing materials. Reacts in moist air to form ferric sulfate.

 

Hazardous Decomposition Products: Burning may produce sulfur oxides.

 

Hazardous Polymerization: Has not been reported

 

Section 11: Toxicological Information

 

 

LD50/LC50: No information available.

 

Epidemiology: No information available.

 

Teratogenicity: No information available.

 

Reproductive Effects: No information available.

 

Neurotoxicity: No information available.

 

Mutagenicity: No information available.

 

Other Studies: No information available.

 

Section 12: Ecological Information

 

Environmental Fate: No information found.

 

Environmental Toxicity: No information found.

 

Section 13: Disposal Considerations

 

Chemical waste generators must determine whether a discarded chemical is classified as a hazardous waste.

Additionally, waste generators must consult government, state and local hazardous waste regulations to ensure complete and accurate

classification.

 

 

 



Register to login and view!

Name :
Password :
   
Forgot Password ? Click HereTo Register
Login
Get a Bulk Quote Request !